Mustang™

Low Profile & Excellent Sheath Compatibility

• 0.040" (1.01 mm) lesion entry profile is only 15% larger than the wire
• 7 mm x 200 mm through a 5F* sheath
• 10 mm x 80 mm through a 6F* sheath

Powerful Dilatation

• NyBaxᵀᴹ Balloon Material combines the strength of Nylon with the flexibility of Pebax allowing for up to 24 atm (2431 kPa) rated burst pressure
• Excellent balloon rewrapping allows for ease of introduction and withdraw all through the sheath

Superior Deliverability

• Combining excellent trackability and pushability with low lesion entry and crossing profiles, Mustang defines a new level in 0.035" (0.89 mm) deliverability

Reduce vascular access site complications

Mustang potentially helps to reduce the need of a closure device, and the risk of post procedural bleeding :

• Mustang is a larger treatment device used through smaller holes (with smaller sheath sizes : sheath compatibility from 5F to 7F)

• Mustang benefits from  a low entry profile which helps to reduce patient complications.
• The tip is only 15% larger than the wire and is coated with Mediglide silicone to facilitate sheath insertion in the patient.

Safe Navigation through Tortuous Anatomy

Mustang is designed to reduce the risk of plaque displacement. Adding a thin, outer layer of material greatly minimizes the effects of stress on the outside of the balloon.*

• Shaft  construction reduces procedure time: rapid inflation & deflation time.

• Highly visible:  Mustang has two highly visible swaged 1.5 mm wide Platinium Iridium RO markers and the dilatation zone is defined by the outside edge to the outside edge of the marker bands.

• Full size matrix to treat spectrum of 0.035’’ (0,889 mm) lesions with a single product line
• Up to 200 mm lengths to treat long SFA disease with a single inflation

Rigorous testing methods simulated “real world” lesions and validated Mustang’s enhanced durability

Mustang is designed to provide excellent deliverability as it facilitates and reduces the time of the procedure.

Ability to push catheter to reach distal lesions

Mediglide coating

The tip and the balloon of Mustang are coated with Mediglide which provides a smooth and safe navigation through tortuous anatomy.

Optimization of the tip

The low profile 0,040’’ (1,01mm) lesion entry profile is designed to enable crossability through tight stenosis. The tip is tapered to facilitate crossing and minimize force needed to cross lesions and it is laser bonded for smooth tip/shaft/balloon transition.

• 6-9% increase in balloon diameter over large working range (10ATM  (1013 kPa) – 24ATM (2431 kPa))
• Mustang gives greater physician choice by enhancing the versatility of the balloon.
• Mustang is designed to provide predictable, accurate results which subsequently reduces the cost of treatment.